90 degree air nozzle_Nozzle type static eliminator_Product

90 degree air nozzle

DN251-SN07 Type

DN252-SN07 Type

The ultra-small design aims at the workpiece in tight locations to remove dust and contaminants while eliminating static electricity. There are a wide variety of nozzles, so you can choose according to your application. By using a high-frequency AC method, an extremely stable ion balance is achieved. Since the ion balance is not affected by the supply air pressure and the installation distance, there is no need to perform cumbersome adjustments after installation.

Features:
• High-frequency AC ionization technology, extremely stable ion balance
• Ultra-small design for easy assembly inside the device
• There are a wide variety of nozzles, and you can choose different types according to the application
• Signal input and output control functions, using IO communication to achieve automatic connection
• Reassuring safety design, 24V DC power supply, no need for high-voltage cables
• Equipped with running status indicator, real-time display of operating status and ion abnormality
• Easy to maintain, the ion needle can be easily removed and cleaned

The LED indicator visually shows the working status

It has an "inspection function" that automatically prompts the cleaning of the ion needle, and various functions can be checked by LED indicators, and the operating status of the static eliminator can be monitored externally by using the output of various functions.

High-frequency AC ionization technology

High level of static elimination, low voltage 2500V; Ion generation frequency: 70,000 times/second;
Extremely stable ion balance (no adjustment required)
Ions can be transported through pipes
The power is dissipated quickly
Can be used up close
High level of security

Positive dissipation time measurement chart:

The time required to reduce the charge of a live object with +1000V to +100V.

Negative dissipation time measurement plot:

The time required to reduce the charge of a live object with -1000V to -100V.

Stable ionic equilibrium

When positive and negative ions are continuously irradiated, the electrostatic voltage of the target is close to 0 V.

品名	主体样式	喷嘴配件	型号	材质	说明
扩散型喷嘴			TN-SN01	SUS 304	直线使空气扩散
花洒型喷嘴			TN-SN02	SUS 304	45度喷射角度更宽的空气扩散
连接型软管喷嘴			TN-SN03	金属	离子喷嘴本体和导管连接用喷嘴可连接任意弯曲的导电性导管导管直径ø6mm,最小弯曲半径：R25mm需配转接头使用（TN-SN10
可调型点式喷嘴			TN-SN04	SUS 304	可在60度范围，任意调整喷射角度使用时先调整喷嘴后固定螺帽需配转接头使用（TN-SN10）
圆头型喷嘴			TN-SN05	塑料	可从前端的小孔中喷射强力的直线状空气需配转接头使用（TN-SN10）
平头型喷嘴			TN-SN06	塑料	宽范围均匀的静电除尘需配转接头使用（TN-SN10）
90度型喷嘴			TN-SN07	塑料	并且空气喷射角度与螺纹面垂直适合空间受到限制的场所需配转接头使用（TN-SN10
棒型侧吹喷嘴			TN-SN08	SUS 304	除静电有效长度270mm可提高除静电区域适合空间受到限制的场所需配转接头使用（TN-SN10）
棒型侧吹喷嘴+可弯曲软管			TN-SN09	SUS 304	除静电有效长度270mm，将棒型侧吹喷嘴边接到导电性导管导管直径ø6mm, 最小弯曲半径：R25mm，导管长度对除静电时间影响较大，请跟据现场情况做选择合适需配转接头使用（TN-SN10）
喷嘴转接头			TN-SN010	SUS 304	RP1/4（内螺纹）转M16×1.5（外螺纹）适用于喷嘴与静电消除器螺纹之间。
竹节万向喷嘴			TN-SN19	朔料	可安装于TN2101或TN2102，产品默认长度40cm，共13个喷嘴。客户可以跟据需要缩短或延长。
万向喷嘴			TN-SN20	金属	自动离子平衡系统，LED显示维护告警功能 I/0接线信号(支持PLC控制)，自动化行业推荐
旋转固定支架			TN-RB01	SUS 304	离子风嘴本体固定安装使用

Model	DN251-SN07	DN252-SN07
Operating voltage	≤1.0S(Distance 50mm)
Current consumption	≤\|土50V\|(AVE)Distance 50mm
Dissipation time	0.1~0.7Mpa
Ionic balance	≤\|士10V(AVE)
Supply air pressure	0.15~0.7MPa
Supply air temperature	0 to +50°C
Connecting tubes	The outer diameter ∅ 6, the inner diameter ∅ 4
Ozone concentration	<0.03ppm @30cm
I0 interface	-	have
Operating environment	0~+55°C (note no condensation), 35~65%RH
Volume/weight	33X110X20.8mm/ body approx. 120g