Desktop Double-head Ionizing Blower_Ionizing Fan Type_Product

DF722B

Desktop Double-head Ionizing Blower

Using AC ionization technology, it can quickly eliminate static electricity on the work table within 3 seconds, and the ion balance is stable within ± 15V, providing reliable electrostatic protection for electronic manufacturing, semiconductor and laboratory environments. Its lightweight body design (only about 1kg) can be flexibly placed in any desktop space, effectively reducing dust particle adsorption and improving product yield, especially suitable for dust-free workshops and clean environments. Low noise operation (<50dB) ensures a quiet working environment and is ideal for static elimination in electronic production lines and laboratories.

Features:
• Quickly eliminate static electricity, dissipation time<3 seconds, efficient protection of sensitive electronic components
• Lightweight ion fan, compact design optimized for electrostatic protection of the work table
• Built-in cleaning brush, easy maintenance of ion needle, extend the service life of equipment
• Wind speed adjustment to meet the needs of different scenarios of electronic assembly/laboratory
• Silent, low-noise design, ISO occupational health standards
• CE certification, industrial anti-static equipment quality assurance

ESD protection standards

In line with the United States EOS/ESD standard, the use of charged flat panel monitor accurate detection of static elimination performance, to ensure that the residual voltage stability control in the ± 35V safety range. Electrostatic dissipation time<3 seconds, quickly neutralize the charge, suitable for electronic manufacturing, semiconductor and other ESD sensitive environment. Through ANSI/ESD S20.20 certification, we provide electrostatic protection solutions to ensure production yield and equipment safety.

Filter cleaning hood

In a dusty environment, the installation of high-efficiency dust filter cover can significantly improve air quality and block harmful substances such as dust and particles. Made of corrosion-resistant materials, mesh design science, not only to ensure air circulation, but also effectively intercept dust, extend the service life of equipment. Suitable for high dust areas, the easy-to-disassemble design simplifies the maintenance process.

Typical dissipation time

According to the American ESD Association ANSI/ESD S20.20 standard, the electrostatic dissipation time needs to be tested under high wind speed conditions, requiring rapid decay from 1000V to 100V. The test uses the charge plate monitoring method to record the voltage decay curve to ensure accurate data. It is suitable for electronic manufacturing, semiconductor and other ESD sensitive environments to verify the electrostatic neutralization efficiency of ion fans and other equipment, and the residual voltage should be stable within ± 35V.

Test instrument: CPM374

Using CPM374 electrostatic tester, the test voltage decays rapidly from ± 1000V to ± 100V at a measuring distance of 30cm, which meets the requirements of IEC61340-5-1 standards. The test environment humidity is 55% and the temperature is 25°C to ensure accurate and reliable data. It is suitable for electronic manufacturing, semiconductor and other ESD sensitive areas to verify the efficiency of ion fan, and the residual voltage is stable within ± 35V.

Model	DF722B
Operating voltage	220V/50Hz or 110V/60Hz (customized)
Product power	60.0W (high) or 14.5 (low)
Dissipation time	Less than 2.5 sec (maximum airflow)
Ionic balance	0V±15V
Ionization techniques	AC ionization
Airflow area	60cmX90cm
Airflow output	2X45～110cfm
Fan noise	50dB minimum and 90dB maximum
Operating environment	Temperature: 0~40°C Humidity: 35~80%RH (non-condensing)
Ozone concentration	＜0.03ppm (Measured 15 cm in front of the fan)
Installation	Fitted with metal brackets/seats
Weight	4.2kg
Volume	394(L)X97(W)X230mm(H)
Matching	Dust filter
Warranty	1 year limited warranty