+ Customer service
Customer service

contact information

Suzhou

address:88 Ling Shan Road, Xukou, Wuzhong District, Suzhou City, Jiangsu Province, Unit 9A, 5th Floor, Liandong U Valley.

Telephone:0512-66559708

Technical support

If you have any other questions, you can contact us by email

Contact Email

marketing@tronovo.com

Esd Audit Kit

Hammer type surface resistance gauge

TR7800 Type

A professional hammer surface resistance tester, also known as an impedance tester or megohmmeter, is used to measure the impedance or resistance of all conductive, antistatic, and electrostatic venting surfaces. Easy to use, high quality, and highly reliable, the meter can also measure relative humidity and temperature, which affect electrical properties.

Features:
• Power supply: 9-volt battery or adapter;
• Test voltage: 10V/100V;
• Resistance range: 103-1012 OHM;
• Accuracy: 10%;
• Accurate resistance tester.

Fields of application

The TR7800 Professional Hammer Surface Resistance Tester, also known as Impedance Tester or Megohmmeter, is used to measure the impedance or resistance of all conductive, antistatic, and electrostatic venting surfaces. Easy to use, high quality, and highly reliable, the meter can also measure relative humidity and temperature, which affect electrical properties.

Intuitive display of values, temperature, humidity

The ASNI/ESDA Association and the European CECC recognize the influence of environmental conditions at the time of measurement, so their standards require the recording of temperature and humidity, if a material is measured under high humidity conditions and all the measurement requirements are passed, but the customer receives the material and uses it at low temperatures and low humidity, it is possible that the material will not meet the requirements.

Anti-static measurement of tables, chairs, table cushions, and shelves

Review and measure point-to-point resistance (RTT) and resistance to ground (RTG) according to ESD Association documents

ModelTR7800
Resistivity range103 to 1012 Square ohms
Resistance value range103 to 1012Ohms (with external probe)
Test voltage<106The voltage is10V
≥106The voltage is 100V(Manual switching)
Test time15 seconds
Readings showLCD display
Environmental measurementstemperature:0°C – 37.7°C
humidity:10% ‐ 90%RH
Weight103g
Use environmentTemperature: 0~50°C Humidity: 35~80%RH
Attached attachmentsBattery*1, adapter *1, telescopic cable*2
Certificate of Conformity/Warranty Card*1, Factory Accuracy Report*1
5-lb probe*2, hand-held protective case*1
Warranty2-year limited warranty

There are currently no application cases available

There are currently no films available