Electronic factory SMT processing, electrostatic protection is essential, in the production process, good electrostatic protection, can effectively protect the electronic components, to protect the quality of the product. pcba board with precision electronic components, many components are more sensitive to the voltage, higher than the rated voltage impact will damage these components.
Question:

PCBA board in the function of the test when there is a high rate of defective, the test when the function is normal, but the finished product to the hands of the customer to use, more fatal is that some PCBA board in the test when the function is normal, but the finished product to the hands of the customer to use, but there are occasional bad.

method settle an issue：

1、A SMT line routinely need to install static eliminator equipment are: (on the board machine, solder paste printing, docking station, placement machine, plug-in machine, reflow soldering, wave soldering, dispensing machine, board dispenser, labeling code at the test station, maintenance station, etc.)

2、Install the Tronovo TR8660 high performance static eliminator above the product.

3、Use the standard corner bracket to adjust the appropriate installation angle

4、Different factories can be installed according to the actual needs of the relevant equipment

Keywords: Eyewear, Eyewear static electricity, electronic factory SMT mounter static eliminator, solder paste printing machine static remover, V-CUT separator static dust removal equipment, wave soldering static eliminator, wave soldering anti-static cooling ion bar, feeder static eliminator, board loading machine static eliminator, PCB cleaning machine static eliminator