Ultra-thin small high-frequency ionizing fan_Ionizing Fan Type_Product

Ultra-thin small high-frequency ionizing fan

DF231 type

The lightweight design, stable ion balance, independent of the installation position, can be easily installed inside the device. It quickly eliminates static electricity and provides the best protection against static damage of the component. When an abnormal discharge is perceived, an alarm signal is output, and the power supply is cut off at the same time to prevent problems before they occur. In the case of contamination of the electrode pin, etc., the self-diagnosis needs to be cleaned, and an alarm signal is output.

Features:
• Compact design, ultra-thin thickness of only 39mm
• High-frequency AC ionization technology, extremely stable ion balance
• Newly upgraded discharge needle detection function, ion needle abnormal maintenance warning
• Four automatic alarm functions, which can intuitively display the abnormal status
• 5 levels of air volume adjustment, the air volume can be adjusted by pressing buttons
• Signal input and output control function, with IO control interface and wireless and wired networking function

Small ionizing blower

Slim and lightweight design for installation in tight spaces.

High-frequency AC ionization technology

High level of static elimination, low voltage 2500V; Ion generation frequency: 70,000 times/second;
Extremely stable ion balance (no adjustment required)
Ions can be transported through pipes
The power is dissipated quickly
Can be used up close
High level of security

The instrument panel is assembled with static elimination

The impact of static electricity on product quality is very large, dust adsorption caused by electrostatic attraction, dielectric breakdown caused by electrostatic discharge, and the installation of static eliminators in the working area greatly reduces the hidden dangers of electrostatic in the production process of electronic components.

Typical dissipation time

According to the United States ESD Institute standard: ANSI/ESDS20.20-2014, each point represents the static dissipation time from 1000V to 100V at maximum wind speed.

Space-saving – equivalent to 1/4 the size of conventional products*

With a thickness of only 38.8 mm, it is small in size, flexible in operation, and takes up less space, so it can be easily installed inside the device or in small spaces.

Ion Balance【 Performance Diagram 】

Each needle can release positive and negative ions, compared with the DC type is not easy to adsorb charged particles in the environment, the ion balance can be maintained for a long time (no adjustment is required), and at the same time, it has the characteristics of fast power dissipation, safety and reliability, close use, and maintenance saving.

Fan Alarm - Visualizes the operating status of the fan

When the fan is abnormal, the red light will be displayed, and the power supply will be cut off to prevent the problem before it happens.

High Voltage Alarm - Visualizes ion output status

At all times, when the output state of the ion senses a high voltage abnormality, a red light is displayed to warn it.

Remote monitoring and control - Reduce manual intervention and increase efficiency

Realize the automatic operation of the equipment, such as automatic start and stop, automatic alarm, etc.

Fault feedback and maintenance - Real-time alerts to quickly locate problems

The PLC interface can improve the reliability and stability of the equipment.

Model	DF231
Operating voltage	24VDC±5%
Product power	Approx. 6W
Dissipation time	Approx. 2.5 sec. @ 15cm (Max Airflow)
Ionic balance	≤ \|±10V\| (AVE)
Ionization techniques	High-frequency AC mode, about ±2KV, 70KHz
Wind speed and volume	10~33.5CFM (5 steps of wind speed adjustment)
Airflow area	6×45cm
Fan noise	45dBA @ 100cm
Ozone concentration	≤0.04ppm @ 15cm
Alarm indicator	Fan alarm (FAN) High-voltage alarms (H.V）
Communication interface	I/O input and output signals
Material	Discharge needle: tungsten, housing: SUS 304
Operating environment	0~+45°C (note no condensation), 35~75%RH
Volume	111.5×98×38.8mm
Weight	About 0.2Kg
Warranty	One-year limited warranty

There are currently no application cases available

There are currently no films available

Catalog Download

TF2102-4产品目录

Manual Download

TF2102-产品手册

Product

About

contact information

Suzhou

Technical support