Digital display small high-frequency ionizer fan_Ionizing Fan Type_Product

Digital display small high-frequency ionizer fan

DF231P Type

The lightweight design, stable ion balance, independent of the installation position, can be easily installed inside the device. It quickly eliminates static electricity and provides the best protection against static damage of the component. When an abnormal discharge is perceived, an alarm signal is output, and the power supply is cut off at the same time to prevent problems before they occur. In the case of contamination of the electrode pin, etc., the self-diagnosis needs to be cleaned, and an alarm signal is output.

Features:
• Compact design, ultra-thin thickness of only 39mm
• High-frequency AC ionization technology, extremely stable ion balance
• Newly upgraded discharge needle detection function, ion needle abnormal maintenance warning
• Four automatic alarm functions, which can intuitively display the abnormal status
• 5 levels of air volume adjustment, the air volume can be adjusted by pressing buttons
• Signal input and output control function, with IO control interface and wireless and wired networking function
• Signal input and output control functions

Static elimination fan

Small design, only the size of the palm of your hand.

High-frequency AC ionization technology

High level of static elimination, low voltage 2500V; Ion generation frequency: 70,000 times/second;
Extremely stable ion balance (no adjustment required)
Ions can be transported through pipes
The power is dissipated quickly
Can be used up close
High level of security

Static elimination inside the device

The lightweight design, stable ion balance, easy to hang in any position, can quickly eliminate the static electricity generated in today's high-end manufacturing process, and provide the best anti-static damage protection for components;

Typical dissipation time

According to the United States ESD Institute standard: ANSI/ESDS20.20-2014, each point represents the static dissipation time from 1000V to 100V at maximum wind speed.

Miniaturization - equivalent to 1/4 of the size of conventional products*

The company's proprietary technology achieves both ultra-compact and high-speed static elimination, making it easy to install in tight locations or for additional installation.

Alarm output - visual display of operational status

Equipped with a display, it can confirm the operation status according to the content displayed on the screen, output an alarm signal when an abnormality is perceived, and cut off the power supply at the same time, so as to prevent problems before they occur.

Maintenance Alarm - Equipped with ion needle dirt detection function

The level of dirt in the ion needle is monitored at all times, and maintenance is required through signal output and LED light to warn you.

Intelligent monitoring - with network monitoring function

Manually through the mobile phone WeChat or computer software can manage the ionizer switch, adjust the air volume, and check the working status of the ionizer in real time.

Safer - the release voltage is only 2200V

The imported customized ceramic high-pressure generator is reliable and safe.

IO interface - signal input and output control

For PLC automation control, the IO interface is the most important component.

Practicality - two-way alarm fault signal output

Use fault signals to remotely monitor ionizing fans for maintenance or faults

Model	DF231P
Operating voltage	24VDC±5%
Product power	Probauer
Dissipation time	Approx. 2.5 sec. @ 15cm (Max Airflow)
Ionic balance	≤ \|±10V\| (AVE)
Ionization techniques	High-frequency AC mode, about ±2KV, 70KHz
Wind speed and volume	10~33.5CFM (5 steps of wind speed adjustment)
Airflow area	6×45cm
Fan noise	45dBA @ 100cm
Ozone concentration	≤0.04ppm @ 15cm
Alarm indicator	Fan alarm (FAN) High-voltage alarms (H.V）
Communication interface	Networking modules are supported I/O Input and output signals
Material	Discharge needle: tungsten, housing: SUS 304
Operating environment	0~+45°C (note no condensation), 35~75%RH
Volume	111.5×98×48.8mm
Weight	Approx. 0.3Kg
Warranty	One-year limited warranty

There are currently no application cases available

There are currently no films available

Catalog Download

TF2102-4产品目录

Manual Download

TF2104-产品手册

Product

About

contact information

Suzhou

Technical support