Concern

The static electricity of the finished film exceeds the standard of 20kV, which is not up to the control standard, and a large amount of static electricity is coupled inside the product, which will cause problems such as adhesion, inadvisability of separation, electric shock, and so on, when the customer uses the product.

Prescription

1.Installation of Tronovo's static electricity eliminator for slitting machines, static electricity remover bar TR8630, 2 pcs.

2.The upper static eliminator is located above the upper take-up reel of the slitter and above the finished film of the upper take-up reel

3.The lower static eliminator is located above the lower winding shaft of the slitter and above the lower wound finished film

4.Installation distance 5cm