PET film has a wide range of uses in electrical insulation materials, such as capacitors, cable insulation, printed circuit wiring substrate, electrode slot insulation, etc. PET material itself is not static, but easy to friction with other substances, contact, separation, static electricity. Static electricity in the production process is very harmful, if there is a large amount of static electricity, may lead to adsorption of dust, foreign objects, personnel electric shock, and serious spark discharge caused by explosion and other hazards.
Question:

PET film in the production process will produce static electricity, if there is static electricity will cause the product sticky connection, winding is not neat, especially if the front end of the winding due to static electricity and wrinkles, it will cause the whole product can not be used, the more serious cause of the finished product extrusion can not be wound up, and even downtime, and static plastic film is easy to adsorb the dust, resulting in product quality problems.

Solution:

1、 Installation of Tronovo TR8630 high power de-static ionization bar at the inlet of the winding position.

2、 Installation height from the film 4-5 cm, you can effectively eliminate static electricity, need to remove dust customers can be connected to the 8mm air hose, remove static electricity and dust at the same time.

3、 The blowing type ion bar is constructed, connected to clean compressed air, and its strong ionized wind removes dust and foreign matter from the surface of the object when electrostatic removal is performed on the film.

4、  According to the product size, production line size is different, the length of ionizing wind rod can be customized.

Keywords: Eyewear, Eyewear static electricity, ion rods, ion rods for removing static electricity, film static electricity eliminator, plastic film static electricity removing equipment, static electricity eliminator for release film