The existing cleaning device for the reverse side of the breathable belt of the man-made board pre-pressing machine has a poor cleaning effect, although it is equipped with a brush cleaning and suction device at the bottom end of the breathable mesh belt. Installation of ionic wind-assisted cleaning device, first of all, the surface of the mesh belt and fiber de-static, can effectively prevent the brush down the fiber back to the top of the breathable mesh belt to improve the cleaning effect of the breathable mesh belt, improve product quality, reduce the rate of waste boards, and reduce the environmental pollution of the workshop.

concern

The surface of the mesh belt should be de-static eliminated after the elimination of static electricity on the surface of the mesh belt, the lower the better, the requirement of the entire length of 3000mm (3 meters)

prescription

1. Installation of Tronovo dust-collecting electrostatic precipitator ion bars on top of the mesh belt, 1 set

2. Connect clean and dry compressed air and blow ionized air downward.

3. Adjust the appropriate air pressure according to the site