Die-cutting production is a high-precision production action, any one of the tiny details may have an impact on the final product, in the die-cutting operation process due to the static electricity caused by the release film caused by the bad, resulting in the final product is bad, customer complaints often occur.

Question:

The slit diaphragms are electrostatically charged and adsorbed together and cannot be easily separated.

Solution:

1、Installation of Tronovo's high power static dissipators at the unwind and cutter positions.

2、Installation height 4~5cm from the product surface

3、If the products with release film should be noted that the bottom of the product needs to be de-static, such as the knife mouth at the bottom of no installation position, you can observe the release film and the product can be installed at the point of separation, you can also be connected to the compressed air to grow the distance of de-static in order to solve the installation of the problem of the location of the limitations of the problem.

Keywords: suzhou in addition to static electricity, ion wind knife, ion air knife, suzhou ion rod, industrial static eliminator, suzhou ion wind rod, in addition to static electricity rod, static eliminator, film cut static eliminator, release film in addition to static electricity, slitting static eliminator, slitting static elimination, elimination of static electricity equipment, self-adhesive slitting static elimination, long-distance static eliminator, the center of the coiler static eliminator, the winding machine in addition to static electricity, suzhou static electricity elimination equipment, Suzhou static electricity remover