Select Static Eliminator_Knowledge_AiYong Instruments (Suzhou) Co., Ltd.

According to the standard requirements, the production site anti-static facilities need to test the overall effect of friction voltage, including: the ground (mats), walls, curtains, workstations (mats), work chairs, shelves, workstations, material flow conveyance apparatus, packaging bags (boxes), work clothes (work hats, gloves), work shoes and so on.

EPA anti-static technical requirements

* Abrasion voltage: <100V

* SJ/T10694-2006 standard regulations

Daily testing of antistatic floors

The measuring instrument used: Eyen TR7800 heavy hammer surface resistance meter, heavy hammer column electrode 2, diameter 63.5mm, weight 2270g, according to SJ/T 10694-2006 “electronic product manufacturing and application system anti-static test general specification” requirements, ground point to point resistance test qualified indicators for: 1 × 10 ^ 4 ~ 1 × 10 ^ 10 ohms, the system The qualified index of point-to-point resistance test on ground is 1×10^4 ~ 1×10^10 ohm, and the qualified index of system resistance test is 1×10^4 ~ 1×10^9 ohm.

EPA anti-static technical requirements

* Point-to-point resistance requirement: 1×10^4 ~ 1×10^10Ω

* System resistance requirement: 1×10^4 ~ 1×10^9Ω

* Friction voltage: <100V

* SJ/T10694-2006 standard requirements

Walking voltage detection for people entering the EPA area

Referring to the method of ANSI/ESD STM97.2, when a person walks on an antistatic floor, the human body voltage is less than 100V as required by the standard ANSI/ESD S20.20-2014 “Electrostatic Discharge Control Procedures”.

EPA anti-static technical requirements

* Point-to-point resistance requirement: 1×10^4 ~ 1×10^10Ω

* System resistance requirement: 1×10^4 ~ 1×10^9Ω

* Friction voltage: <100V

* SJ/T10694-2006 standard requirements

Miconductor Cleanroom Ionization System Selection

The elimination of static electricity in large-area workshops depends on a systematic intelligent indoor ionization system, rather than a scattered ion fan. Photolithography area, EFEM wafer handling, post-CMP cleaning, packaging testing, Bonding and dispensing curing are also plagued by charging and particle adsorption.

2FDB70E1-C9D3-4B44-A7E2-87EB7B7859FD_AI看图

References

* ANSI/ESD STM3.1-2015: Ionization Test Method

* ANSI/ESD SP3.4-2016: Periodic Test Method

* SJ/T 10694-2022: Anti-static Test Method

* GB/T 33555-2025: Electrostatic Control in Cleanrooms

* Datasheet: Tronovo TS6503 Product Catalog

Static Eliminator Selection for Auto, Medical & New Energy

In addition to static electricity equipment selection should first determine the industry and process, and then determine the equipment form, should not first than the price.

Reference source
* ANSI/ESD STM3.1-2015: Ionization Testing Method
* ANSI/ESD SP3.4-2016: Periodic inspection of static eliminators
* JJF (Electronic) 0110-2023: Calibration Specification for Ion Fan
* SJ/T 10694-2022: Anti-static test method for electronic product manufacturing and application systems
* Electrostatic-Catalog-TF4040.pdf: The source of parameters for the selection of electrostatic equipment in this paper.

TB5300 series characteristics and use points

The selection of ion wind rod shall confirm the power consumption speed, ion balance and station distance at the same time, and the model cannot be determined by a single index. The insulating

Reference source

* Specifications: Aiyong Electrostatic-Catalog-TB5301-TB5301P.pdf, Aiyong Electrostatic-Catalog-TB530X Series.pdf

* Manual: E-Use-Manual-TB5301/TB5301P / TB5302 / TB5303B / TB5303H / TB5304B-V2510.pdf

* Series documentation: Aiyong Electrostatic-Selection Catalog-2026.pdf, Aiyong Electrostatic-Comprehensive Catalog-2026.pdf, TB5300 Series Comparison Materials

* Standards: ANSI/ESD STM3.1-2015; ANSI/ESD SP3.4-2016; SJ/T 10694-2022; GB/T 33555-2025

* Website: esd.tronovo.com