Problems

1. There is static electricity during meter counting and checking, which shocks the workers.

2. When unloading the rolls, there is also static electricity, which shocks the workers.

3. This problem occurs every winter.

Solution to the problem

1. Install Tronovo industrial static eliminator TR8630 above the meter counter, 1 unit, installation height 5cm.

On-site measurement:

In the ion bar above (into the cloth measured at the cloth surface static electricity up to 30KV), the fabric after the ion bar static electricity elimination (out of the cloth measured surface static electricity is basically no).

But in the rolled fabric surface measurement of static electricity is about 10KV (rolled friction fabric surface again generated static electricity), can solve the problem of static electricity when checking.

If you need to solve the problem of static electricity when rolling, you need to adjust the position of the ion bar, install the ion bar at the roll, and through the compressed air for long-distance static electricity elimination.

However, the customer said that it is not good to install and give up because of the space needed for putting on the cloth and unrolling the roll.