Problems

After painting the front bar there are particles that look like dust inside the paint, and the rear bar has pockmarks in some places

Solution for the problem

1. Before painting, use Tronovo's ion gun to remove static electricity, connect clean and dry compressed air to remove static electricity on the surface first, and then blow to remove dust.

2. In order to maintain good results, the dust in the air in the dedicated spray booth also needs to be equipped with a dust collection device.

3. because the workpiece in the grinding molding, transportation friction and other processes will produce static electricity, in the electrostatic field under the force will be floating in the air dust adsorbed on the surface of the workpiece, and it is difficult to clean up, seriously affect the effect of spraying paint, the workpiece in the spray must be used to remove high-voltage electrostatic dust removal equipment to remove the static electricity and dust.