Concern

Flying ink when printing patterns

Prescription

1. Before airbrushing, use the Tronovo Ion Static Removal Bar to remove static electricity from the surface of the material.

2. The TR8690 electrostatic discharge rod for ronovo is mounted on each of the two sides of the exterior of the headstock.

Advantages of De-Static Wands

1. 24V DC power supply, connected in the header board

2. The power supply cable is a special Igus highly flexible cable for special drag chains.

Fixing Requirements for De-static Bars

1. Static bars need to be installed 3-5CM away from the height of the print media, the side needs to be away from the chassis metal surface 2CM distance

2. The ground wire in the static bar's working power cord needs to be well grounded.

3. It is recommended to control the electrostatic bar with independent power supply, and can be made into a key type to turn on and off the electrostatic bar.

4. When printing materials with static electricity to open the electrostatic bar, when printing materials without static electricity “metal, wood materials” need to close the electrostatic bar